[Icc-mot] Fw: Problem regarding loading the program in oc-console.

[Sanjoy.Ray at telcon.co.in]

Dear All, 

 As indicated by Mr. Sarvanan below,  one of our HCS12 TB is un able to 
communicate with oc-console and one of the LED(D3 LED-2COL) is not 
glowing.
Since one of our HCS12 TB is working fine with oc-console and we are doing 
some programming in that board.

Secondly I have also tried with  COMPOD 12 I am unable to communicate with 
the target board and unable to load the .dbg file in noice debugger.

The steps I have followed for loading .dbg file in noicedebugger is as 
follows:-
connected the compod12 with the pc DB9 and the other end to the target 
board(HCS12TB).
Open the ICC12 version 7.00 and from the tool bar selected project 
->option->Target->Device Configuration->Hc9s12Dx512 and in s2 recordtype 
linear ,s2 records only are selected.
Then  tool bar selected project ->option->compiler->Accept Extensions and 
in output format I have selected the s19 with ASM/source level Debugging.
Then in the ICC12 Version 7.00 I opened a project and run the project in 
the same.
Now I opened the Noice Debugger ,from the tool bar I have selected the 
option-> Target communication->interface->Elektronikladen compod12/NG
selected the option-> Target communication->mc9s12dx512(Targer chip), 
COM1(Port) since I have only one comport in my PC,8Mhz(Bus 
frequency),selected Use 24-bit hardware breakpoints at 28 and Use 
flash/EEPROM Burner.
Then from file in the tool bar I have selected the Load  option and loaded 
.dbg file in it.

Now Iam able to see asm. source code in the NoiceDebugger and able to 
single step it.(ie., the pc icon is moving when i do single stepping and 
the corresponding values and address are changing),but accroding to my 
program the LED should glow in the HCS12 TB but it is not happening.

And I am unable to do the source level debugging. I have tested My program 
(glowing a LED) with the another board through oc-console and it's working 
fine. So there is no error in my program.Kindly help me in solving this 
problem.

With regards,
S.K.Ray
----- Forwarded by Sanjoy K Ray/Telcon on 01/18/2007 03:44 AM -----

<saravanan.arumugam at incat.com> 
01/17/2007 05:26 AM

To
<support at elmicro.com>
cc
<Sanjoy.Ray at telcon.co.in>
Subject
Problem regarding loading the program in oc-console.






Dear Oliver Thamm,
 
I am Saravanan working as a consultant to TELCON,Jamshedpur,India. We 
bought 3 HCS12 TB from Elmicro,which is dispatched from Elmicro on October 
2006. Now one of our board is unable to communicated with the 
oc-console.One of the LED(D3 LED-2COL) not glowing.
 
We are unable to load our program in oc-console.Kindly advice us what will 
be the problem? and how can we proceed from here? Waiting for your reply. 
Thanking you.
 
Regards,
Saravanan.A
 
 
************************************************************************************************************************************************** 

Email Disclaimer: 
Information contained and transmitted by this e-mail is confidential, 
proprietary, and legally privileged data of INCAT that is intended for use 
only by the addressee. If you are not the intended recipient, you are 
notified that any dissemination, distribution, or copying of this e-mail 
is strictly prohibited. You are requested to delete this e-mail 
immediately and notify the originator. Any views expressed by an 
individual do not necessarily reflect the view of INCAT. While this e-mail 
has been checked for all known viruses, the addressee should also scan for 
viruses. Internet communications cannot be guaranteed to be timely, 
secure, error or virus-free as information could be intercepted, 
corrupted, lost, destroyed, arrive late or incomplete.INCAT does not 
accept liability for any errors or omissions. To know more about INCAT 
please visit http://www.incat.com 
*I********************************************************************************************************************************************** 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://dragonsgate.net/pipermail/icc-mot/attachments/20070118/2f574525/attachment.html