SV: SV: [Icc-avr] IDE asks for reload file after compile

[Bengt Ragnemalm]

Richard, can you direct me to some old versions, 7.17 or 7.16 so I can test
this?

/Bengt

> -----Ursprungligt meddelande-----
> Från: Steven Lose [mailto:sl at ecpower.dk]
> Skickat: den 15 september 2008 08:27
> Till: benra at imt.liu.se; Discussion list for ICCAVR and ICCtiny Users. You
> do NOT need tosubscribeto icc-announce if you are a member of this.
> Ämne: SV: SV: [Icc-avr] IDE asks for reload file after compile
> 
> Hi Bengt.
> 
> If you believe the change came with 7.18B, try and downgrade to 7.17 to
> see if the behaviour is ok again.
> Must also be nice information to Richard.
> 
> 
> Med venlig hilsen / Best regards / mit freundlichen Grüßen
> 
> EC POWER A/S
> 
> Steven Lose
> 
> Software Ingeniør
> 
> Tlf.: +45 87434100
> 
> Direkte tlf. +45 58286608
> 
> Email: sl at ecpower.dk
> 
> www.ecpower.dk
> 
> -----Oprindelig meddelelse-----
> Fra: icc-avr-bounces at imagecraft.com [mailto:icc-avr-
> bounces at imagecraft.com] På vegne af Bengt Ragnemalm
> Sendt: 15. september 2008 07:41
> Til: 'Discussion list for ICCAVR and ICCtiny Users. You do NOT
> needtosubscribeto icc-announce if you are a member of this.'
> Emne: SV: SV: [Icc-avr] IDE asks for reload file after compile
> 
> OK, in that case I just turn it off to get rid of it. This is a rather new
> behaviour and I am pretty sure it started the same time as I upgraded to
> 7.18B from some 7.17. I have not updated anything else of the software
> tools
> like AVR Studio. But I will check with our network guys if something is
> changed on the server side.
> 
> /Bengt
> 
> > -----Ursprungligt meddelande-----
> > Från: icc-avr-bounces at imagecraft.com [mailto:icc-avr-
> > bounces at imagecraft.com] För Richard Man
> > Skickat: den 12 september 2008 22:28
> > Till: icc-avr at imagecraft.com
> > Ämne: Re: SV: [Icc-avr] IDE asks for reload file after compile
> >
> > It's not the COF file, but the source file that's open. WHen opening
> > a file, the IDE keeps track of the filedate of the file in the
> > internal data structure. Once in a while, it checks the date of the
> > disk file again and see if it is in sync. It just uses the FileDate()
> > function so I am not entirely sure how it calculates the date. You
> > can turn ff the behavior (Tools->Options) if the behavior is funky,
> > but I'm not sure how it can be happening.... May be there is some
> > implications with the file dates if they are on a network....
> >
> >
> > At 05:22 AM 9/8/2008, Bengt Ragnemalm wrote:
> > >I checked the file creation time on the COF file on the server and
> > >it is the same as on my system. Is that enough or must I check the
> > >actual server clock?
> > >
> >
> > // richard (This email is for mailing lists. To reach me directly,
> > please use richard at imagecraft.com)
> >
> > _______________________________________________
> > Icc-avr mailing list
> > Icc-avr at imagecraft.com
> > http://dragonsgate.net/mailman/listinfo/icc-avr
> 
> 
> _______________________________________________
> Icc-avr mailing list
> Icc-avr at imagecraft.com
> http://dragonsgate.net/mailman/listinfo/icc-avr