[Icc-avr] help : AlphNum Display : LED

[John Baraclough]

Hi Gerhard,

A bit OT, but the simplest and fastest to market solution is the 
MAX7219, used in non-decode mode. It's not going to be the cheapest 
solution but is very easy to interface.

Contact me off-list if for some other links.

All the best for now,
John


At 13:24 09/10/2007, you wrote:
>Hi Group,
>I wish to source/find out on how to design an Alpha-Num LED display
>unit to display 24? chars.  I have access to a std dot-type red led 
>display (5x7dots 50mm)
>I have, however, never done this type of multiplex design
>
>Is there anyone here who can give me some guidelines? or perhaps have a very
>similar application to share with me?
>
>I appreciate your feedback.
>
>Regards,
>Gerhard Laubscher
>South Africa
>
>TeleFax : +27-21-557 0160    Mobile : 082 366 1950
>email : 
><mailto:amsol at amssolutions.co.za>amsol at amssolutions.co.za   website: 
><http://www.amssolutions.co.za>http://www.amssolutions.co.za
>_______________________________________________
>Icc-avr mailing list
>Icc-avr at imagecraft.com
>http://dragonsgate.net/mailman/listinfo/icc-avr
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://dragonsgate.net/pipermail/icc-avr/attachments/20071009/beeda1ff/attachment.html