[Icc-avr] IDE windows

[Albert vanVeen]

Five minutes after writing this, and opening my project that I closed
yesterday at lunchtime:
ICCAVR now opened completely blank !?!?! no project or anything opened.
This must be the system's revenge for complaining.
 
From: icc-avr-bounces at imagecraft.com
[mailto:icc-avr-bounces at imagecraft.com] On Behalf Of Albert vanVeen
Sent: Friday, November 02, 2007 08:19 AM
To: Discussion list for ICCAVR and ICCtiny Users. You do NOT
needtosubscribeto icc-announce if you are a member of this.
Subject: RE: [Icc-avr] IDE windows


Yes, that's exactly it.
On the subject, there is something else.
>From other editor's I'm used to "things", e.g. ctrl-T delete word,
ctrl-Y delete line.
This can be defined in the project setup, but this too gets lost
sometimes, and I don't know how often I've had to define ctrl-T again.
So it seems, that context saving is not complete or not at all.
 
Speaking about context: when I open "projectA.prj" I expect ICCAVR to
open projectA, however it always just opens the last project I was
working on before. This not very helpful, as you then have to go into
Project->Open again AND change directories.
 
Sorry to have started another list of complaints.
 
All for now,
Albert.
 

________________________________

From: icc-avr-bounces at imagecraft.com
[mailto:icc-avr-bounces at imagecraft.com] On Behalf Of John Baraclough
Sent: Thursday, November 01, 2007 11:00 PM
To: Discussion list for ICCAVR and ICCtiny Users. You do NOT need
tosubscribe to icc-announce if you are a member of this.
Subject: RE: [Icc-avr] IDE windows


Hi Richard,

It is the boundary between the main edit window and the Project/Browser
window that keeps moving. The strange thing is that it doesn't seem to
happen every time the IDE is closed and reopened just often enough to be
irritating. I've sent you a picture off-list.

All the best for now,
John
 

At 08:39 01/11/2007, you wrote:


	Which boundaries? There are code to keep track of the different
window sizes, but may be something got broken. If you give me a specific
thing to look for, I will check it out.
	
	At 11:11 AM 10/31/2007, Albert vanVeen wrote:
	
	

		Every time I open the IDE, I have to shift the
boundaries between the windows to where I like them to be. Why is this
setting not saved automatically, and can I force it to be saved?
		 
		Thanks, 
		 
		Albert van Veen
		software engineer
		Pertronic Industries
		17 Eastern Hutt Road
		Wingate, Lower Hutt
		 


	// richard (This email is for mailing lists. To reach me
directly, please use richard at imagecraft.com) 
	_______________________________________________
	Icc-avr mailing list
	Icc-avr at imagecraft.com
	http://dragonsgate.net/mailman/listinfo/icc-avr

Scanned by Bizo EmailFilter
<http://www.bizoservices.com/services/email_filter.html>  Scanned by
Bizo EmailFilter
<http://www.bizoservices.com/services/email_filter.html>  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://dragonsgate.net/pipermail/icc-avr/attachments/20071102/671fe79c/attachment.html