From richard at imagecraft.com Sat Jan 20 15:12:36 2007 From: richard at imagecraft.com (Richard) Date: Sat Jan 20 15:20:39 2007 Subject: [Icc-arm] new website is alive Message-ID: <6.1.0.6.2.20070120140745.08c8cd28@192.168.100.42> It may take up to 24 hours for the DNS change to propagate, but the new imagecraft website is live! Go visit www.imagecraft.com and let us know if something is amiss. Thanks. // richard From jdhharris at earthlink.net Sat Jan 20 18:11:29 2007 From: jdhharris at earthlink.net (John Harris) Date: Sat Jan 20 18:18:49 2007 Subject: [Icc-arm] new website is alive Message-ID: <380-22007102121129785@earthlink.net> Hi Richard. You might check out this. The document /software/readmeAVR.txt was not found at www.imagecraft.com. Regards ____________________________________________________________ John Harris CustomStage LLC 11 Quail Hollow Drive Tijeras NM 87059 USA Phone: (505)286-8224 Cell: (505)379-3015 jdhharris@earthlink.net > [Original Message] > From: Richard > To: ; ; ; ; > Date: 1/20/2007 5:06:09 PM > Subject: [Icc-arm] new website is alive > > It may take up to 24 hours for the DNS change to propagate, but the new > imagecraft website is live! Go visit www.imagecraft.com and let us know if > something is amiss. Thanks. > > // richard > > > _______________________________________________ > Icc-arm mailing list > Icc-arm@imagecraft.com > http://dragonsgate.net/mailman/listinfo/icc-arm From richard at imagecraft.com Sun Jan 21 13:16:28 2007 From: richard at imagecraft.com (Richard) Date: Sun Jan 21 13:24:32 2007 Subject: [Icc-arm] NoICE-ARM / Segger J-link bundle available Message-ID: <6.1.0.6.2.20070121125822.088d8c90@192.168.100.42> You can now purchase NoICE-ARM ($159) and the NoICE-ARM/J-link bundle ($399) from our (new) website. NoICE-ARM is a Windows source level debugger fully compatible with ICCV7 for ARM and Segger J-link is of course one of the most widely used USB JTAG pod for the ARM microcontrollers. NoICE-ARM can debug in ARM7 devices and has builtin flash programming support for the NXP LPC and STR ARM7 and more will be added later. The combination of ICCARM and NoICE-ARM/J-link is significantly less than other company's offerings. Now you can start ARM development without breaking your development tools budget! // richard